2615 MF+
ORAGUARD® 2615 MF+ is the matte-finish PPF (paint protection film) variant of ORAFOL’s 2615 series; the Turkish distributor lists the 2615 series with gloss and matte finish options. It shares the film family and technical construction of 2615 GF+; the key difference is the surface finish — GF+ is gloss, MF+ is matte. The matte surface turns glossy paint into a satin look, and the paint underneath stays original when the film is removed. Peak Detailing applies this film in its enclosed studio in Sarıyer, serving Maslak, Levent and the surrounding area.
- Market
- Türkiye (Turkey)
- Series
- ORAGUARD 2615
- Variant
- MF+ (matte)
- Finish
- Matte (satin)
- Gloss counterpart
- 2615 GF+
- Manufacturer
- ORAFOL Europe GmbH
2615 Series Technical Properties
The technical construction of 2615 MF+ is the same as 2615 GF+. The values below are taken from the product family’s GF+ technical data sheet (rev. 2025/5); the MF+ variant is supplied with a matte finish. The document is the GF+ TDS and is linked under that name.
| Film type | TPU (polyurethane) |
|---|---|
| Total thickness | 185 micron (≈7.3 mil) |
| Finish | Matte (satin) |
| Manufacturer service life | 5 years |
| Self-healing | Yes — heat-activated self-healing surface |
| Chemical resistance | Good |
| UV / yellowing resistance | Anti-yellowing topcoat |
| Mechanical protection | Protection against scratches |
| Technical data sheet | GF+ TDS (PDF) |
Peak Detailing Application Prices
Starting prices; 20% VAT included, 3 interest-free instalments available. The exact price is confirmed at a free pre-inspection. You can compare all clear/matte options on the PPF service page.
Hood
Front Section
Full Body
Verification Sources
- ORACAL Türkiye — PPF comparison: the 2615 series is listed with “Finish: Ultra Gloss / Matte”.
- ORACAL Türkiye — 2615 GF+: the series’ distributor product page.
- 2615 GF+ TDS (PDF, rev. 2025/5): the series’ technical data sheet — the MF+ variant is supplied with a matte finish.
Q & A
What is the difference between 2615 MF+ and 2615 GF+?
Both are films of the ORAGUARD 2615 series; the key difference is the surface finish — GF+ is gloss, MF+ gives a matte (satin) look. According to the distributor’s comparison, apart from the appearance both finishes provide the same physical protection.
Is there a separate technical data sheet (TDS) for 2615 MF+?
A separate MF+ TDS has not been published. The technical construction is shared with the same series’ GF+ film; the values on this page are taken from the 2615 GF+ technical data sheet (rev. 2025/5), with the matte variant differing in surface finish. The matte finish option is listed in the distributor’s product range.
How much does a 2615 MF+ application cost at Peak Detailing?
The hood package starts from 11,000 ₺, the front section from 26,500 ₺ and the full body from 75,000 ₺; VAT is included and 3 interest-free instalments are available. The exact price is confirmed at a free pre-inspection.